This might be what you are looking for. Below, is a section from the Microsoft Excel Help directory, just in case you are unable to view the same thing. If you select Help in your Excel program, then Table of Contents, Formatting Charts, and last, Change the Scale of the Vertical (Value) Axis in a Chart; you shall see what is listed below.
Good Luck
1.In a chart, click the value axis that you want to change, or do the following to select the axis from a list of chart elements:
1.Click anywhere in the chart.
This displays the Chart Tools, adding the Design, Layout, and Format tabs.
2.On the Format tab, in the Current Selection group, click the arrow next to the Chart Elements box, and then click Vertical (Value) Axis.
2.On the Format tab, in the Current Selection group, click Format Selection.
3.In the Format Axis dialog box, click Axis Options, and then do one or more of the following:
Important The following scaling options are available only when a value axis is selected.
To change the number at which the vertical (value) axis starts or ends, for the Minimum or Maximum option, click Fixed and then type a different number in the Minimum box or the Maximum box.
To change the interval of tick marks (tick marks and tick-mark labels: Tick marks are small lines of measurement, similar to divisions on a ruler, that intersect an axis. Tick-mark labels identify the categories, values, or series in the chart.) and chart gridlines (gridlines in charts: Lines you can add to a chart that make it easier to view and evaluate data. Gridlines extend from the tick marks on an axis across the plot area.), for the Major unit or Minor unit option, click Fixed and then type a different number in the Major unit box or Minor unit box.
To reverse the order of the values, select the Values in reverse order check box.
Note When you change the order of the values on the vertical (value) axis from bottom to top, the category labels on the horizontal (category) axis flip from the bottom to the top of the chart. Likewise, when you change the order of the categories from left to right, the value labels flip from the left side to the right side of the chart.
To change the value axis to logarithmic, select the Logarithmic scale check box.
Note A logarithmic scale cannot be used for negative values or zero.
To change the display units on the value axis, in the Display units list, select the units that you want.
To show a label that describes the units, select the Show display units label on chart check box.
Tip Changing the display unit is useful when the chart values are large numbers that you want to appear shorter and more readable on the axis. For example, you can display chart values ranging from 1,000,000 to 50,000,000 as 1 to 50 on the axis and show a label that indicates that the units are expressed in millions.
To change the placement of the axis tick marks and labels, select any of the options that you want in the Major tick mark type, Minor tick mark type, and Axis labels boxes.
To change the point where you want the horizontal (category) axis to cross the vertical (value) axis, under Horizontal axis crosses, click Axis value, and then type the number that you want in the text box, or click Maximum axis value to specify that the horizontal (category) axis crosses the vertical (value) axis at the highest value on the axis.
Note When you click Maximum axis value, the category labels are moved to the opposite side of the chart.